CT1200FX
Machining range (X × Y) |
---|
1200 x 500 mm |
Electrode diameter |
φ0.3 ∼ φ3.0mm |
Options
LH-35θ or 70θ rotating head (NC-B axis)
Machining can be performed by angling the electrode while the workpiece remains fixed.
RT500N-100 immersion titl-turn table (NC-AB axes)
When used in combination with the CT1600FX, this immersion tilt-turn axis system is ideal for machining of polygon micro holes.
ESF24 or ESF36 automated electrode change system
Electrodes are changed automatically, for long-term unmanned operation with no wasted time.
GSF4 or GSF6 automated guide change system
Electrode guides are changed automatically for fully automated machining of holes with different diameters.
Delivers the largest machining area of any product in Japan, while maintaining the same machining performance as a compact machine.
Item | Specification | |
---|---|---|
Machining fluid | – | DI water |
Work table size (W × D) | (mm) | 800 × 550 |
Machining tank size (W × D) | (mm) | 1460 × 825 |
Left-right (X) and front-back (Y) movement distance | (mm) | 1200 × 500 |
Workpiece maximum load weight | (kg) | 600 |
Main shaft up-down movement distance | (mm) | 600 |
Electrode guide up-down movement distance | (mm) | 500 |
Maximum distance between work table and guide | (mm) | 1070 |
Diameter of installed electrodes | (mm) | φ0.3 ∼ φ3.0 (△φ3.1 ∼ φ6.5) |
Maximum length of installed electrodes | (mm) | 600 |
List of other options | |
---|---|
Column extension | Extends the distance between the work table and guide. |
CWP200 | Machining fluid circulation system (2000 L) DI water supply system that improves performance during high-precision machining. |
Operation lamps | 3-color signal lamps (Ready / Auto / Alarm) |
KC177 | Machining fluid cooling system |
Hand pulser | Allows axis feed and positioning with the manual handle. |