CT300FX + SF02FX Small Hole EDM Drilling
- Precision energy control
- Guide structure for stabilizing micro electrodes (patented)
- Automated electrode change supporting electrode sizes as small as φ0.02 mm (patented)
- Can be used for a broad range of applications from small-volume machining of prototype components to mass production.
SH-35θ rotating head (NC-B axis)
Machining can be performed by angling the electrode while the workpiece remains fixed.
RT120N-5 immersion tilt-turn table (NC-AB axes)
When used in combination with the CT300FX, this immersion tilt-turn axis system is ideal for machining of polygon micro holes.
ESF24 or ESF36 automated electrode change system
Electrodes are changed automatically, for long-term unmanned operation with no wasted time.
GSF4 automated guide change system
Electrode guides are changed automatically for fully automated machining of holes with different diameters.
|Work table size (W × D)||(mm)||300 × 300|
|Machining tank size (W × D)||(mm)||480 × 430|
|Left-right (X) and front-back (Y) movement distance||(mm)||300 × 200|
|Workpiece maximum load weight||(kg)||300|
|Main shaft up-down movement distance||(mm)||400|
|Electrode guide up-down movement distance||(mm)||280|
|Maximum distance between work table and guide||(mm)||325 / 310 (when ESF is installed)|
|Diameter of installed electrodes||(mm)||φ0.02 ∼ φ3.0|
|Maximum length of installed electrodes||(mm)||450 / 400 (when ESF is used)|
|Machining fluid||–||DI water|
|List of other options|
|Column extension||Extends the distance between the work table and guide.|
|CWP15||Machining fluid circulation system (150 L)|
DI water supply system that improves performance during high-precision machining
|KC77||Machining fluid cooling system|
|Operation lamps||3-color signal lamps (Ready / Auto / Alarm)|
|Hand pulser||Allows axis feed and positioning with the manual handle.|