|Machining range (X × Y)|
|300 x 200 mm|
|φ0.1 ∼ φ3.0mm|
|Immersion machining in oil|
|Machining immersed in oil reduces the effects of heat.|
SH-35θ rotating head (NC-B axis)
Machining can be performed by angling the electrode while the workpiece remains fixed.
RT120N-5 immersion tilt-turn table (NC-AB axes)
When used in combination with the CT300FX, this immersion tilt-turn axis system is ideal for machining of polygon micro holes.
ESF24 or ESF36 automated electrode change system
Electrodes are changed automatically, for long-term unmanned operation with no wasted time.
GSF4 automated guide change system
Electrode guides are changed automatically for fully automated machining of holes with different diameters.
SF02FX micro hole machining power unit (and other special parts for micro machining)
Allows machining with φ0.1 – φ0.02 electrodes.
Special oil model needed for carbide and similar machining. In combination with various options, can be used for a broad range of machining.
|Machining fluid||–||Electric discharge machining oil|
|Work table size (W × D)||(mm)||300 × 300|
|Machining tank size (W × D)||(mm)||480 × 430 (Fixed height: 160 mm)|
|Left-right (X) and front-back (Y) movement distance||(mm)||300 × 200|
|Workpiece maximum load weight||(kg)||300|
|Main shaft up-down movement distance||(mm)||300 (MT30)|
|Electrode guide up-down movement distance||(mm)||240|
|Maximum distance between work table and guide||(mm)||285 / 270 (when ESF is installed)|
|Diameter of installed electrodes||(mm)||φ0.1 ∼ φ3.0 (△φ3.1 ∼ φ6.5)|
|Maximum length of installed electrodes||(mm)||400 / 300 (when ESF is used)|
|List of other options|
|Column extension||Extends the distance between the work table and guide.|
|Operation lamps||3-color signal lamps (Ready / Auto / Alarm)|
|RE40NN||Special machining oil cooling system|
|Hand pulser||Allows axis feed and positioning with the manual handle.|