ST300
This high-precision manual machine features the same design as the high-grade models, and can also be used for machining of components. Select 2 of the 100 machining conditions that are registered in the hight-grade H-controller to perform machining under different conditions.
| Machining range (X × Y) |
| 300 × 200mm |
| Electrode diameter |
| φ0.1 ∼ φ3.0mm |
| Item | Specification | |
|---|---|---|
| Work table size (W × D) | (mm) | 300 × 300 |
| Machining tank size (W × D) | (mm) | 480 × 430 |
| Left-right (X) and front-back (Y) movement distance | (mm) | 300 × 200 |
| Workpiece maximum load weight | (kg) | 300 |
| Main shaft up-down movement distance | (mm) | 400 |
| Electrode guide up-down movement distance | (mm) | 280 |
| Maximum distance between work table and guide | (mm) | 325 |
| Diameter of installed electrodes | (mm) | φ0.1 ∼ φ3.0 (△φ3.1 ∼ φ6.5) |
| Maximum length of installed electrodes | (mm) | 450 |
| Machining fluid | – | DI water or special water-based fluid |
| Options | |
|---|---|
| Column extension | Extends the distance between the work table and guide. |
| SRJ | Main axis rotation/feed speed controller (with jump function) This manual system allows fine adjustments to the electrode rotation and feed speeds when performing machining with fine electrodes. |
| CWP15 | Machining fluid circulation system (150 L) DI water supply system that improves performance during high-precision machining |
| KC77 | Machining fluid cooling system |